Customizing Display Elements - RIDGID SeekTech SR-20 Operator's Manual

Customizing Display Elements

In Active Line Trace Mode
checked box means the element is enabled and an unchecked box means it is disabled� From the Customizing Display
Elements Screen, press the Select Key to check and uncheck boxes�
Note: Any changes made to Active Line Trace Mode also apply to Passive Line Trace Mode and vice versa.
Max Signal Indicators
Signal Focus Control
Guidance Arrows
No Signal
Center Signal Strength
and Sonde Mode you can customize the display elements that appear on screen� A
Note: The settings shown here are the SR-24's defaults.
Customizable Display Elements
Element
Race Track, Watermark,
Level Pointer
No Signal Icon
Center Signal Strength
Proximity Threshold
Control
Tracing Line Distortion
Sensitivity
Distortion Line
Guidance Arrows
Current Measurement
Signal Angle
Signal Strength Audio
Signal Strength
Line Trace Sonde
Mode Mode
 
 


 
 


 
 
 
Distortion Line Display
Signal Angle and Current
Measurement
Proximity Threshold Control
Tracing Line Distortion
Sensitivity
Signal Strength Audio
Signal Strength Display
English – 51