Units Of Measurement; Lcd Contrast; Custom Frequencies - RIDGID SeekTech SR-20 Operator's Manual

SD Card Information
The SD Card Information screen gives you a report of
the amount of space remaining on the SD card� To view
the SD Card Information screen, follow these steps:
1� Press the Menu Key
2� Use the Down Arrow Key
Card icon
3� Press the Select Key
4� Press the Down Arrow Key
Information icon
Key �

Units of Measurement

The SR‑24 can display measured depth in meters (m)
or feet (ft)� To change the measurement units, open the
Main Menu and press the Down Arrow Key
gate to the Depth Units icon
Key to toggle between Meter or Feet� Press the Menu
Key to save and exit�

LCD Contrast

To adjust the LCD contrast, open the Main Menu and
press the Down Arrow Key
Contrast icon
open the contrast adjustment screen� Use the Left and
Right Arrow Keys to adjust the contrast� Press the
Menu Key to save and exit�
44 – English
to open the Main Menu�
to highlight the SD
�
to open the SD Card menu�
to navigate to the
and press the Select
to navi‑
� Press the Select
to navigate to the LCD
� Press the Select Key

Custom Frequencies

You can create, store, edit, and delete up to 30 unique,
custom frequencies on your SR‑24� You can create cus‑
tom frequencies ranging from 10 Hz to 35 kHz, making
the SR‑24 compatible with transmitters made by many
manufacturers�
Create Custom Frequencies
To create a new custom frequency, follow these steps:
1� Press the Menu Key
2� Use the Down Arrow Key
Frequency icon
3� Press the Select Key
Frequency menu�
4� There are three types of frequencies you can create
• Sonde
• Active Line Trace
• Passive Line Trace
5� Highlight the type of frequency you want to create
and press the Select Key
Note: There are additional preprogrammed fre-
quencies that can be added to the active frequen-
cy list from this menu. Press the Select Key
toggle the frequencies active and inactive.
6� Press the Select Key
Frequency Input screen�
to
to open the Main Menu�
to highlight the Custom
�
to open the Custom
�
again to display the
to