Bluetooth - RIDGID SeekTech SR-20 Operator's Manual

Bluetooth

The following section applies to the SR-24 only.
The SR‑24 is compatible with Bluetooth 2�0 devices that
use the RFCOMM profile, including many smart phones,
tablets, and GPS units� Refer to www�RIDGID�com/SR24
for a list of some models that have been tested to work
with the SR‑24�
You can connect the SR‑24 to compatible Bluetooth
devices and configure connection options from the
Bluetooth Options menu�
Bluetooth Connection Method
To use Bluetooth you must connect the SR‑24 and
your Bluetooth device� To initiate connection from your
Bluetooth device, follow these steps:
1� Enable Bluetooth on your Bluetooth device�
2� Open the Bluetooth list and select the SR‑24 from
the list� After connecting, the SR‑24 briefly displays
the following image on screen�
3� Make sure the status of the SR‑24 on your device's
Bluetooth list appears as connected� The SR‑24 has
failed to connect when the image below displays on
the SR‑24's screen� The image displays until the
Menu Key or the Select Key
Note: If there is a Bluetooth device present and the
SR-24 has failed to connect, repeat step 2.
4� Once connected, confirm the Bluetooth icon ap‑
pears in the bottom right of the SR‑24's screen�
34 – English
Alternate Bluetooth Connection Method
Note: It is usually most convenient to initiate the Bluetooth
connection to the SR-24 from the Bluetooth device.
If you are unable to initiate the connection from your
Bluetooth device try the alternate method from the
SR‑24� To initiate the Bluetooth connection from the
SR‑24's Main Menu, follow these steps:
is pressed�
Confirming Bluetooth Connection
During operation, confirm your Bluetooth device is con‑
nected to the SR‑24 by observing the Bluetooth icon
in the bottom right of the screen�
1� Make sure your Bluetooth device is enabled and
discoverable�
Note: The Bluetooth device must be discoverable
for the SR-24 to find it.
2� Press the SR‑24's Menu Key
Menu�
3� Use the Down Arrow Key
Bluetooth Options icon
Select Key to open the Bluetooth Options menu�
4� Highlight the Search icon
Select Key to search for Bluetooth devices�
Note: If there is a Bluetooth device present and the
SR-24 has failed to find the Bluetooth device, make
sure the Bluetooth device is discoverable.
5� Use the Down Arrow Key
you want to connect to�
Note: New Bluetooth devices appear below the
previously paired devices in the Bluetooth Options
menu.
6� Press the Select Key
Bluetooth device�
to open the Main
to highlight the
and press the
and press the
to highlight the device
to connect the SR‑24 to the
Bluetooth
enabled