Maintenance And Support; Cleaning; Accessories; Transportation And Storage - RIDGID SeekTech SR-20 Operator's Manual

Maintenance and Support

Cleaning

WARNING
Remove batteries prior to cleaning the SR-24 to re-
duce the risk of electrical shock.
Do not use liquid or abrasive cleaners, solvents, or scrap‑
ing tools to clean the SR‑24� Do not immerse in water or
allow any liquid to enter the unit�
Clean with damp cloth and mild detergent� Only clean
screen with cleaners approved for use on LCD screens�

Accessories

WARNING
The following accessories have been designed for
use with the SR-24. Other accessories may become
hazardous when used with the SR-24. To reduce the
risk of serious injury, only use accessories specif-
ically designed and recommended for use with the
SR-24.
The following accessories have been designed for use
with the SR‑24:
• RIDGID SeekTech Transmitters
• ST‑305
• ST‑510
• ST‑33Q+
• RIDGID SeekTech Inductive Signal Clamp
• Sondes
• FloatSonde
• Battery Sonde
• SeeSnake camera integrated Sonde (Flexmitter)

Transportation and Storage

Store and transport your equipment with the following in
mind:
• Keep in a locked area out of the reach of children
and people unfamiliar with its operation�
• Put in a dry place to reduce risk of electrical shock�
• Store away from heat sources such as radiators,
heat registers, stoves, and other products (including
amplifiers) that produce heat�
• Storage temperature should be ‑20°C to 60°C [‑4°F
to 140°F]�
• Do not expose to heavy shocks or impacts during
transportation�
• Remove the batteries before shipping and before
storing for extended periods of time�
English – 55