Connecting To A Transmitter With Bluetooth - RIDGID SeekTech SR-20 Operator's Manual

Bluetooth Power Settings
To change the Bluetooth power settings from high (de‑
fault) to low, you must disconnect the SR‑24 and the
Bluetooth device� Then use the Down Arrow Key
the Bluetooth Options menu to highlight the Bluetooth
Power icon � Press the Select Key
between high and low
to save and exit�
Bluetooth Information
To view the Bluetooth Information screen, follow these
steps:
1� Press the Menu Key
2� Use the Down Arrow Key
Bluetooth Options icon
3� Press the Select Key
Options menu�
4� Highlight the Information icon
the Select Key �
FCC ID
IC
MAC
from
to toggle
� Press the Menu Key
to open the Main Menu�
to highlight the
�
to open the Bluetooth
and press
Connecting to a Transmitter with
Bluetooth
The following section applies to the SR-24 only.
With Bluetooth enabled, the SR‑24 can be used to view
and control the transmitter's screen, eliminating the need
to walk back and forth between your transmitter and the
area being traced� Use the SR‑24 to remotely set fre‑
quencies, output power, turn the transmitter on and off,
or know if the transmitter has turned off unexpectedly�
Range
The ST‑33Q+ and SR‑24 work best when kept with‑
in 200 m [656 ft] of each other while connected by
Bluetooth� The quality of the connection between devic‑
es may be affected by a number of factors including dis‑
tance between devices and objects in the path between
devices� For the best quality connection, maintain a clear
line of sight between devices and set the transmitter so
its battery faces the receiver� Objects blocking the line of
sight between the transmitter and the receiver may sig‑
nificantly reduce the quality of their connection�
English – 37