Service And Repair; Disposal - RIDGID SeekTech SR-20 Operator's Manual

Service and Repair

WARNING
Improper service or repair can make the SR-24 un-
safe to operate.
Service and repair of the SR‑24 must be performed by
a RIDGID Independent Authorized Service Center� To
maintain the safety of the tool, make sure a qualified re‑
pair person services your equipment using only identi‑
cal replacement parts� Discontinue using the SR‑24, re‑
move the batteries, and contact service personnel under
any of the following conditions�
• The equipment does not operate normally when op‑
erating instructions are followed�
• The equipment exhibits a distinct change in perfor‑
mance�
• The equipment has been dropped or damaged�
• Liquid has been spilled or objects have fallen into
the equipment�
For information on your nearest Ridge Tool Technical
Service Department or any service or repair questions:
• Contact your local RIDGID distributor�
• Go to www�RIDGID�com�
• Email the RIDGID Technical Services Department at
rtctechservices@emerson�com�
• Call 1‑800‑519‑3456 (USA and Canada only)�
56 – English

Disposal

Parts of the SR‑24 contain valuable materials that can
be recycled� There are companies that specialize in re‑
cycling that may be found locally� Dispose of the com‑
ponents in compliance with all applicable regulations�
Contact your local waste management authority for more
information�
For EC countries: Do not dispose of electrical
equipment with household waste!
According to the European Guideline 2002/96/
EC for Waste Electrical and Electronic
Equipment and its implementation into nation‑
al legislation, electrical equipment that is no longer us‑
able must be collected separately and disposed of in an
environmentally correct manner�