Display Elements - RIDGID SeekTech SR-24LE Operator's Manual

Display Elements

Line Trace Mode Display
The display elements shown below appear in Passive Line Trace Mode
Trace Mode , and Radio Broadband Mode
Icon Name
Active Line Trace
Mode
Passive Power
Line Trace Mode
Passive Radio
Frequency
Broadband Line
Trace Mode
Passive OmniSeek
Line Trace Mode
Proximity Number
Current
Measurement (mA)
Signal Strength
12 – English – SR-24LE/SR-20
Line Trace Mode Display Elements
Description
The Active Line Trace icon indicates the
SR-24LE is set to an Active Line Trace
frequency�
The Passive Line Trace icon indicates the
SR-24LE is set to a Passive Power Line Trace
frequency�
The Passive Radio Frequency Broadband Line
Trace icon indicates the SR-24LE is set to a
Passive Radio Frequency Broadband Line
Trace frequency�
The Passive OmniSeek Line Trace icon
indicates the SR-24LE is set to a Passive
OmniSeek Line Trace frequency range�
The Proximity Number represents the nearness
of the target line to the SR-24LE� The larger the
number, the closer you are to the target line�
Current Measurement (mA) appears in
miliamps when the SR-24LE is directly over the
line�
Strength of the signal detected by the
Omnidirectional antennas� Observe the Signal
Strength to determine the maximum signal
strength� At the maximum signal strength, the
receiver is over the target line�
�
, Active Line