Display Elements - RIDGID SeekTech SR-20 Operator's Manual

Locators
Hide thumbs Also See for SeekTech SR-20:
Table of Contents

Advertisement

Display Elements

Line Trace Mode Display
The display elements shown below appear in Passive Line Trace Mode
Broadband Mode
Proximity Number
Currently Set Frequency
Receiver Operation Mode
GPS Estimated
Positional Error
GPS
Measured Depth
Tracing Line
(example shows distortion)
Icon
Name
Active Line Trace
Mode
Passive Power Line
Trace Mode
Passive Radio
Frequency Broadband
Line Trace Mode
Passive OmniSeek
Line Trace Mode
Proximity Number
Current Measurement
(mA)
Signal Strength
Signal Angle
Measured Depth
Line Trace Mode Display Elements
Description
The Active Line Trace icon indicates the SR‑24 is set to an Active Line Trace
frequency�
The Passive Line Trace icon indicates the SR‑24 is set to a Passive Power
Line Trace frequency�
The Passive Radio Frequency Broadband Line Trace icon indicates the SR‑24
is set to a Passive Radio Frequency Broadband Line Trace frequency�
The Passive OmniSeek Line Trace icon indicates the SR‑24 is set to a
Passive OmniSeek Line Trace frequency range� Refer to the OmniSeek
section for more information about OmniSeek Line Tracing.
The Proximity Number represents the nearness of the target line to the SR‑24�
The larger the number, the closer you are to the target line�
Current Measurement (mA) appears in miliamps when the SR‑24 is directly
over the line�
Strength of the signal detected by the Omnidirectional antennas� Observe the
Signal Strength to determine the maximum signal strength� At the maximum
signal strength, the receiver is over the target line�
Signal Angle appears in place of Current Measurement (mA) when the
detected signal is at an angle greater than 35°�
Measured Depth shows the approximate depth of the target line� The depth
appears in either meters (m) or feet (ft)� In addition to the measured depth
reading, Depth Average displays a Depth Average Report on screen� Refer to
the Depth Average section for more information.
, Active Line Trace Mode
Current Measurement (mA)
Battery Status
Backlight
Guidance Line
Bluetooth
SD Card
SD Card Usage Bar Graph
Signal Strength
Guidance Arrows
, and Radio
English – 13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Seektech sr-24

Table of Contents