Setting The Frequency - RIDGID SeekTech SR-20 Operator's Manual

Setting the Frequency

The instructions for selecting frequencies and activating
inactive frequencies from the Main Menu are the same
for Active Line Trace, Passive Power, Passive Radio
Frequency Broadband, OmniSeek, and Sonde frequen‑
cies�
Selecting Active Frequencies
There are three ways to change the frequency:
• Press the Frequency Key
cycle through the list of active frequencies�
• Press and hold the Frequency Key
Frequency Selection menu�
• Press the Menu Key
press the Frequency Key
To change the Active Frequency through the Frequency
Selection menu, follow these steps:
1� Press and hold the Frequency Key
ond to display a list of active frequencies�
2� Use the Up and Down Arrow Keys
the desired frequency�
3� Press the Select Key
quency and return to active view�
one or more times to
to open the
, highlight the frequency, and
�
for half a sec‑
to highlight
to set the highlighted fre‑
Activating Inactive Frequencies
Inactive frequencies are preprogrammed frequencies
that can be activated for specific uses� Inactive frequen‑
cies appear in the Main Menu with the box next to the
number unchecked�
When frequencies are activated they are added to the
Frequency Selection menu and appear in the Main Menu
with the box next to the number checked� Activate your
favorite frequencies to make frequency selection fast
and easy�
To activate inactive frequencies, follow these steps:
1� Press the Menu Key
available frequencies�
2� Use the Up and Down Arrow Keys
the desired inactive frequency�
3� Press the Select Key
highlighted frequency
To deactivate frequencies, uncheck the box next to
the frequency by pressing the Select Key
4� Press the Menu Key
to see the complete list of
to highlight
to check the box next to the
�
�
to save and exit�
English – 33