Table of Contents
Advertisement
Menu List
9: Audio Rec Level
Menu
Level
Mute
10: SD Card/USB Memory
Menu
SD Card
Eject
Format
Speed Test
USB Memory
Eject
Load Settings
Save Settings
Save Settings As
11: Annotation
Menu
Switch
Cursor Display
Calibration
12: System
Menu
Frame Rate
Date & Time Settings
Startup Project
LED Dimmer
LCD Dimmer
Test Pattern
Test Tone
42
Value
(Bold: default)
-INF, -80.0–0.0–10.0dB
Off, On
Value
(Bold: default)
-
[ENTER]
[ENTER]
[ENTER]
-
[ENTER]
[ENTER]
[ENTER]
[ENTER]
Value
(Bold: default)
Off, On
Off, On,
Auto
[Exec]
Value
(Bold: default)
59.94Hz, 50Hz
[ENTER]
Off,
On
1–8
1–8
Off, 75% Color Bar, 100% Color Bar,
Ramp, Step, Hatch
Off, 20dB@1kHz, -10dB@1kHz,
0dB@1kHz
Explanation
Adjusts the output volume.
Turns the mute function on/off. If this is set to "On, " the output audio is
temporarily muted.
Explanation
Safely ejects and allows you to remove the SD card.
Formats an inserted SD card.
Measures the data write speed to the SD card.
-
Safely ejects and allows you to remove the USB flash drive.
Loads a settings file saved on a SD card or USB flash drive back into this unit.
Saves the settings of this unit by overwriting an existing file on an SD card or
USB flash drive.
Save the settings of this unit with a name you specify to an SD card or USB
flash drive.
Explanation
Turns annotation on/off.
Sets whether to show or hide the pen cursor. When set to "Auto, " this is
automatically determined by the type of pen tablet that's connected.
Calibrates the display.
Under the following conditions, the display is grayed out and calibrate can't be
performed.
5 When Switch is "Off"
5 When a tablet is not connected
5 When a tablet without an LCD display is connected
Explanation
Specifies the frame rate.
* Once you change this setting, it is not applied until you press the [VALUE]
knob to confirm and then restart the unit.
Sets the date and time.
Menu
Value
Date
Year/Month/Day
Time
Hour/Minute/Sec.
Time Zone
(*3)
When this is set to "On, " the project automatically opens when the unit starts
up.
Adjusts the brightness of the LEDs.
Adjusts the brightness of this unit's display.
Specifies the test pattern.
Specifies the test tone.
Explanation
Sets the date and time.
Sets the time.
Sets the time zone.
Advertisement
Table of Contents
