Moving A Complete Track (All) - Boss BR-600 Owner's Manual

4
Turn the TIME/VALUE dial to select "AB" and press
[ENTER].
fig.02-320
Move Source
5
Use CURSOR [ ] [
to select the track/V-Track to move from, and track/V-
Track to move to.
6
Press [ENTER].
fig.02-330
7
Use CURSOR [ ] [
to specify the time of the beginning of the location
"T" (To) where you want the data to be moved.
8
When you are ready to execute the move, press
[ENTER].
The display will ask "Are you sure?," so that you can
confirm the operation.
9
Press [ENTER].
Move Event is executed.
10
Press [UTILITY] (or press [EXIT] repeatedly) to
return to the Play screen.
* During updating, "Keep power on!" appears in the upper
line of the display, while the lower line shows what is being
processed.
Move Destination
] and the TIME/VALUE dial
] and the TIME/VALUE dial
Editing the Performance on a Track (Track Edit)
Moving a complete track
■
(ALL)
Perform the procedure given below to move the complete
data from one track to another.
1
Confirm that [PAD] is not lit, then press [UTILITY].
2
Press CURSOR [
"TRK," and press [ENTER].
fig.02-420
3
Press CURSOR [
"MOV," and press [ENTER].
fig.02-430
4
Turn the TIME/VALUE dial to select "ALL" and press
[ENTER].
fig.02-440
Move Source
5
Press CURSOR [
to select the track/V-Track to move from, and track/V-
Track to move to.
] [ ] to move the cursor to
] [ ] to move the cursor to
Move Destination
] [ ] and the TIME/VALUE dial
81