Using The Track Eq; Setting The Track Eq - Boss BR-600 Owner's Manual

Using the Track EQ

Setting the Track EQ

This section explains how to edit the Track EQ settings
(parameters).
For a fuller description of Track EQ, refer to
"Track EQ Parameter Functions" (p. 122).
1
Confirm that [PAD] is not lit, then press [PAN/EQ/
LOOP FX].
2
Press CURSOR [ ] [
"EQ," and press [ENTER].
The EQ Setting screen appears in the display.
fig.03-590
3
Use CURSOR [ ] [
to set the EQ On/Off for each track.
* Pressing a REC TRACK button moves the cursor to the
track corresponding to the button pressed.
4
To change the EQ settings, press CURSOR [
[ ] repeatedly to display the parameter screen,
then turn the TIME/VALUE dial to change the
settings value.
fig.03-600
5
After you have completed the setting, press [EXIT]
repeatedly to return to the Play screen
] to move the cursor to
] and the TIME/VALUE dial
]
Track EQ do not have "patches." Loop effect settings
are saved along with the song data.
If you want to save the settings in the currently
selected song, hold down [STOP], and press [REC].
121