Initializing The Memory Card - Boss BR-600 Owner's Manual

Initializing the Memory Card

• Be aware that when initialized, any existing data
on the card will be erased.
• If you initialize the memory card supplied with
the BR-600, the demo songs on the card will be
lost.
• Before you insert or remove a memory card,
always turn off the BR-600 first.
If a memory card is inserted when the power is
turned on, the data in the memory card may be
destroyed, or the memory card may become
unusable.
• Depending on the capacity of the memory card,
initializing may take more than ten minutes to
complete. This is not a malfunction. The progress
of the initializing is shown in the display. Do not
turn off the BR-600 until the initializing has been
completed.
• Do not remove the memory card or turn off the
BR-600 while the display shows "Keep power on!"
Doing so can destroy the data on the memory card
and/or render the memory card itself unusable.
Initializing the BR-600's Settings
1
Confirm that [PAD] is not lit, then press [UTILITY].
2
Press CURSOR [ ] [
"INI," and press [ENTER].
fig.06-290
3
Press CURSOR [ ] [
"CARD," and press [ENTER].
The confirmation message "Are you sure?" appears in
the display.
fig.06-300
4
To continue the initialization, press [ENTER].
To cancel, press [EXIT] (or [UTILITY]).
When [ENTER] is pressed, initialization begins.
When the initializing has been completed,
"Completed!" appears in the display.
"Keep power on! Song creating..." then appears in the
display, and a new song is automatically created.
In this case, the data type selected is HiFi (MT2).
When creation of the song is finished, the play screen
returns to the display.
] to move the cursor to
] to move the cursor to
199