Tremolo/Pan; Voice Transformer - Boss BR-600 Owner's Manual

Tremolo/Pan

Tremolo is an effect that creates a cyclic change in volume.
Pan cyclically moves the stereo position between left and
right (when stereo output is used).
* This effect can be used when the MODULATION "Type"
parameter is set to "TRM/PAN."
On/Off
This parameter turns the tremolo/pan effect on/off.
Mode
Selects tremolo or pan; also selects how the effect is applied
TRM-TRI :
The volume will change cyclically. Smooth change will be
produced.
TRM-SQR :
The volume will change cyclically. Abrupt change will be
produced.
PAN-TRI :
The sound will be moved cyclically between left and right.
Smooth change will be produced.
PAN-SQR :
The sound will be moved cyclically between left and right.
Abrupt change will be produced.
* "PAN-TRI" and "PAN-SQR" are obtained with stereo
recording (using two tracks).
Rate
Adjust the rate at which the effect will operate.
Depth
Adjusts the depth of the effect.

Voice Transformer

This controls the formants, allowing a variety of voice
characters to be created.
This adds two voice characters with differing formants to
the direct sound.
On/Off
OFF, ON
This parameter turns the voice transformer effect on/off.
Formant1
Adjust the formant of the voice character 1.
Formant2
Adjust the formant of the voice character 2.
FX1 Level
Adjust the volume of the voice character 1.
FX2 Level
Adjust the volume of the voice character 2.
Dir Level
Adjust the volume of the direct sound.
0 – 100
0 – 100
Insert Effect Parameter Functions
-100 – +100
-100 – +100
OFF, ON
0 – 100
0 – 100
0 – 100
109