Adjusting The Tone (Track Eq); Adding Richness And Breadth To The Sound (Loop Effect) - Boss BR-600 Owner's Manual

Putting multiple tracks together (Bounce)

Adjusting the tone (Track EQ)

■
"Track EQ" is an independent two-band equalizer featured
on each track that allows you to adjust the high- and low-
frequency tonal qualities separately.
These are just like the tone control on a stereo.
1
Confirm that [PAD] is not lit, then press [PAN/EQ/
LOOP FX].
fig.00-590
2
Press CURSOR [
"EQ," and press [ENTER].
The EQ settings screen appears in the display.
fig.00-620
3
Press CURSOR [
VALUE dial to turn each Track EQ on or off.
* Pressing a REC TRACK button moves the cursor to the
track corresponding to the button pressed.
4
When changing the EQ settings, press CURSOR
[ ] repeatedly to display the parameter screen,
then use the [CURSOR] and the TIME/VALUE dial to
change the setting's value.
fig.00-630
For more on the settings content, refer to "Track
EQ Parameter Functions" (p. 122).
5
When you have finished making the settings, press
[EXIT] (or [PAN/EQ/LOOP FX]) to return to the Play
screen.
50
] [ ] to move the cursor to
] [ ] and turn the TIME/
Adding Richness and
■
Breadth to the Sound
(Loop Effect)
The BR-600 features chorus, delay, and doubling (any one
of these three can be selected at any one time) as loop
effects, and includes reverb as well. Effective use of these
allows you to add greater breadth to the sound.
What is a loop effect?
Effects connected to the send and return of mixer
effects are called "loop effects." You can adjust the
depth of the effect by changing the send level of each
mixer channel (equivalent to the tracks of the BR-600).
Since the send levels for each track are separate, you
can change the depth individually. This allows you to,
for example, have a deep reverb on the vocals and
slight reverb on the drums, or any such combination.
Opposed to insert effects (p. 92), which are applied to
specific sounds, loop effects are applied to the
complete track.
1
Confirm that [PAD] is not lit, then press [PAN/EQ/
LOOP FX].
fig.00-640
2
Press CURSOR [
"CHO/DLY" or "REV," and press [ENTER].
fig.00-650
] [ ] to move the cursor to