ABB ACH550 series User Manual page 62

60
Group 16
Code Name
1626 MODE LOCK
1627 COST/KWH
1628 LEARN
MODE
1629 LEARN TIME
Group 17
Code Name
1701 OVERRIDE 2
1702 RUN EN OVR
1703 ST EN1 OVR
1704 ST EN2 OVR
1706 ST EN4 OVR
1707 FAULTS OVR
Parameter Descriptions
Resolution Range
1 0 = NOT SEL
1 = AUTO MODE
2 = LOCAL MODE
0.1 c/kWh 0.0 - 100.00 c/kWh
1 0 = NOT SEL
1 = ENABLED
0.1 Hr 0.0 - 200.0 Hr
Resolution Range
1 0 = NOT SEL
1 = DI5
2 = COMM
1 0 = ACKNOWLEDGE
1 = DISREGARD
1 0 = ACKNOWLEDGE
1 = DISREGARD
1 0 = ACKNOWLEDGE
1 = DISREGARD
1 0 = ACKNOWLEDGE
1 = DISREGARD
1 0 = ACKNOWLEDGE
1 = DISREGARD
E-Clipse Bypass Configurations for ACH550 Drives
Default
NOT SEL When Mode Lock is AUTO
(0) MODE, the control panel will not
allow switching to Hand or Off.
When Mode Lock is LOCAL
MODE, the control panel will not
allow switching to Auto.
7.0 c/kWh Cost of energy: cents/kWh
NOT SEL When enabled, bypass learns
(0) average power consumption
while operating in bypass mode
48.0 Hr Time that learn mode will be
active after it is enabled
Default
NOT SEL Selects source for override 2
(0) command.
DISREGA Acknowledge or disregard run
RD enable during override 2.
(1)
DISREGA Acknowledge or disregard start
RD enable 1 during override 2.
(1)
DISREGA Acknowledge or disregard start
RD enable 2 during override 2.
(1)
DISREGA Acknowledge or disregard start
RD enable 4 during override 2.
(1)
DISREGA Acknowledge or disregard
RD overrideable bypass faults during
(1) override 2.
All faults can be overrode except:
3009, 3021, 3022, 3023, 30234,
3027, 3034, 3101, 3202, 3203,
3204, 3205, 3206
Description
Description