Mitsubishi S290U Service Manual page 8

¢ ¢ Adjustment with Microsoft
1. Starting

1. Start Windows 95.
2. Double click [Accessories] folder.
3. Double click [Hyper Terminal] folder.
4. Double click [HyperTrm] icon.
2. Hyper Terminal Setting
1. Click [Properties] in File menu on the Hyper
Terminal window.
[Connection Properties] window will open.
Set as follows on this window.
2. Click [Call] in communication menu on the
window to connect this PROJECTOR.
3. Adjustment
Enter the adjustment command and the adjustment value on the Hyper Terminal window in small alphanumeric letters with
keyboard and press the enter key.
4. Writing Adjustment Value
Enter the writing command and the adjustment value on the Hyper Terminal window in small alphanumeric letters with keyboard
and press the enter key.
Note: This operation is not necessary for adjustment 1 (Clamp Level) and 2 (A/D Convertor) of automatic adjustment.
5. Close Window
Click the closing button placed upper right of the window to close the Hyper Terminal.

Close Windows 95 after closing all opened windows.
2
Windows 95 Operating System
® ®
Item
Connect using
Port settings : Bits per second
: Data bits
: Parity
: Stop bits
: Flow control
Settings : Emulation
ASCII setup : ASCII Sending
: ASCII Receiving Append line feeds to incoming line ends
Setting
Port (COM1-COM4)
9600
8 bit
None
1
None
VT100
Send line ends with line feeds
Echo typed characters locally
Line delay : 1000 milliseconds
Character delay : 10 milliseconds