Table of Contents
Advertisement
6. Removal of POWER ASSY
1. Remove the Front Case Unit following "1. Removal of
FRONT CASE UNIT".
2. Remove the Top Case Assy following "2. Removal of
TOP CASE ASSY".
3. Remove the MAIN PCB ASSY following "3. Removal of
MAIN PCB ASSY".
4. Remove the Optical Unit following "4. Removal of
OPTICAL UNIT".
5. Remove the TERMINAL PCB ASSY following "5.
Removal of TERMINAL PCB ASSY".
6. Remove the RB connector on the Power Assy and the
NA connector on the POWER SUB PCB ASSY as
shown in Fig. 3-5-1.
7. Remove the six (a) screws, raise the Power Assy and
remove it as shown in Fig. 3-5-2.
14
Fig. 3-5-1
a x6
Power Assy
Fig. 3-5-2
Power Assy
RB
NA
POWER SUB PCB ASSY
Advertisement
Table of Contents
