Disassembly - Mitsubishi S290U Service Manual

DISASSEMBLY

1. Removal of FRONT CASE UNIT
1. Remove the two (a) screws as shown in Fig. 3-1.
2. Remove the two (b) screws as shown in Fig. 3-1.
3. Remove the Front Case Unit as shown in Fig. 3-1.
2. Removal of TOP CASE ASSY
1. Remove the Front Case Unit following "1. Removal of
FRONT CASE UNIT".
2. Remove the seven (c) screws as shown in Fig. 3-1.
3. Remove the Top Case Assy as shown in Fig. 3-1.
Note: Also remove the ST Connector on the MAIN PCB
ASSY, the NL and the NR connector on the POWER
SUB PCB ASSY when removing the Top Case Assy.
10
Top Case Assy
a x2
C
x7
ST
NR
Front Case Unit
Fig. 3-1
NL
b
x2