Mitsubishi S290U Service Manual page 32

11. Removal of FAN ASSY (BOTTOM)
1. Remove the Front Case Unit following "1. Removal of
FRONT CASE UNIT".
2. Remove the Top Case Assy following "2. Removal of
TOP CASE ASSY".
3. Remove the MAIN PCB ASSY following "3. Removal of
MAIN PCB ASSY".
4. Remove the Optical Unit following "4. Removal of
OPTICAL UNIT".
5. Remove the two (a) screws and the Fan Assy as
shown in Fig. 3-9.
a x4
POWER SUB
PCB ASSY
Fig. 3-8-2
Fan Assy (Bottom)
a x2
Fig. 3-9
17