Turn Autolaunch Off/On - Xerox DUPLEX TRAVEL User Manual

®
Xerox Duplex Travel Scanner
2. Right click on the PaperIn button, or single left-click on the detailed information.
Right click on PaperIn, left lick on the
detailed information, or press and the
scanner button for 3 seconds to open the
OneTouch Properties.
Note: Some of the options on the One Touch Properties Window are "grayed out" and are not
available, these options are not appropriate for your scanner model.
Changing the PaperIn setting:
1. Click on an application name in the Select Destination list.
Select a file format in the Select Format panel.
2.
Select a scanning configuration in the Select Configuration list.
3.
4. Click on OK to save the changes.
5. Place a page in the scanner.
6. The scanner starts scanning and sends the image to the application, with the file format and
scanning configuration you specified.
Note: Please see the OneTouch Scanning Guide on the installation disc for instructions. You can
also click the Help button in the OneTouch Properties window to open the instructions in an
Internet browser.

Turn AutoLaunch Off/On

If you want to scan from OneTouch button panel on screen, or to be able to place a page in the
scanner and wait until you are ready to initiate the scan, you can turn the AutoLaunch feature off.
This option is in the Application Settings for your scanner's hardware properties.
1. Click on the OneTouch icon in the Windows notification area on the right side of the screen.
24
Loading Documents to Scan
User Guide