Using The Carrier Sheet - Xerox DUPLEX TRAVEL User Manual

®
Xerox Duplex Travel Scanner
The AutoLaunch feature is now turned off. Your scanner will not start scanning until you either
press the button on the scanner, click on the scan button on the OneTouch button panel, or on the
scanning interface from the application you are using.

Using the Carrier Sheet

We recommend using the TWAIN interface when scanning with the carrier sheet. The Carrier
sheet mode option applies color correction specifically tuned for processing images of documents
scanned using a carrier sheet. Please refer to the TWAIN scanning guide on the installation disc.
WARNING: the plastic bag for the carrier sheet poses a suffocation hazard. Keep the
bag away from children.
1. Take the carrier sheet out of its plastic bag.
We recommend that you keep the bag and place the carrier sheet back in the bag when you
are done scanning. This will help to prevent scratches to the carrier sheet.
2. Remove the tissue paper.
3. Open the carrier sheet and place the item you want to scan in the upper-left corner of the
carrier sheet.
If the item you are scanning is not in the upper-left corner of the carrier sheet, you may see
inconsistent results or errors.
4. Open the scanner's TWAIN interface and select Carrier sheet mode.
26
Loading Documents to Scan
User Guide