Engine - Graco GM 5000 Instructions And Parts List

1. Working under the mounting plate (25) of the cart,
3.
Lift
the engine carefully and place it on a work
remove the screw (51), lockwasher (132) and wash-
er (50) which hold the clutch housing
(61)
to the
bench.
cart. See Fig. 39.
two locknuts
(40).
and then Dull the screws
1 6 3 )
out
4.
Remove the Field and Wiring Harness, Clamp and
2. Still working under the mounting plate, remove the Clutch Housing,
as
instructed on pages 36 and 37.
of the base oi the engine. disconnect the ied'wire 5. Skip ahead to Reassembly, page
38,
step 1.
from the engine lead (A). Disconnect the black and
white wires (s8) from
the
field. Pull the wires careful-
engine. See Fig. 39 and 40.
ly through the grommets (24) before removing the NOTE All service to the engine must be performed
by an authorized HONDA dealer.
'
40
Fig. 39
m45
VIEW FROM UNDER ENGINE MOUNTING PLATE
Fig.
40
308-105
35