Start Engine; Select/Prime Pumps - Graco RoadLazer RoadPak 24G677 Operation

Operation

Start Engine

Gasoline is extremely flammable and explosive under
certain conditions. Fuel could spray from the fuel line
connector when it is disconnected from engine. Fuel
could come in contact with the hot muffler and cause
fire or explosion. To reduce the risk of fire or explosion,
always vent the fuel tank and allow engine muffler to
cool before you disconnect the fuel line.
1. Set POWER ON/OFF on Programmable Skipline
Controller to ON.
2. Set engine to choke position ON.
3. Set throttle to half speed and turn key.
4. After engine starts, set choke to OFF.

Select/Prime Pumps

1. Open hydraulic valve to activate pumps.
22
2. Slowly turn pressure control clockwise until pump
begins to stroke.
3. When flushing fluid comes out of return lines, set
hydraulic valve to OFF position.
4. Place suction hoses in paint drums.
5. Open hydraulic valve to activate pumps.
ti16920a
ti16922a
ti15838a
ti16645a
ti16920a
3A1214D