Printer Doesn't Print - Ricoh AP505 Printer Reference

Troubleshooting

Printer Doesn't Print

Possible Cause
Is the power on?
Is the interface cable
properly connecting the
printer to your comput-
er connected securely?
Are you using a correct
4
interface cable?
Does the On Line indi-
cator stay on?
Is the paper set?
Does the Error indicator
stay red?
32
Solutions
Make sure that the power cord is securely plugged into the
wall socket and the printer's power socket.
Turn on the printer's power switch.
Printer On and Off"
Connect the interface cable properly. If there are any con-
nectors or screws, make sure they are fastened securely.
See the "Quick Installation Guide" for details about the set-
tings.
The type of interface cable you should use depends on your
computer. Be sure to use the correct one.
If the cable is damaged or worn, replace it with a new one.
See the "Quick Installation Guide" for details about the set-
tings.
Press {On Line} to light it up.
Load paper into the paper tray or on the bypass tray.
"Loading Paper"
Check the error message on the panel display and do the re-
quired action. P.29 "Error & Status Messages on the Opera-
tion Panel"
P.6 "Turning the
P.25