Other Printing Problems - Ricoh Type 2018 Printer Reference

Other Printing Problems

Problem
The print on the If [Toner Saving] is selected on the [Print Quality] tab in the printer driver, the
entire page is fad- entire page will be faded when printed.
ed.
❒ In PostScript 3, click [Advanced...] on the [Paper/Quality] tab, and then se-
See the printer driver Help.
Smudged print. Settings for thick paper have not been made when printing on thick paper.
• PCL 6/5e and PostScript 3
• RPCS™
When printing If the printer driver is configured to use the graphics command, the graph-
graphics, the out- ics command from the machine is used to print.
put and the screen
If you want to print accurately, set the printer driver to print without using
are different.
the graphics command.
See the printer driver Help.
Page layout is not Print areas differ depending on machine used. Information that fits on a
as expected. single page on one machine may not fit on a single page of another ma-
chine.
Adjust the [Printable area:] setting in the [Printer Configuration...] dialog box
on the [Print Settings] tab in the RPCS™ printer driver.
See the printer driver Help.
Duplex printing is • Duplex printing cannot be done with paper set in the bypass tray.
not possible.
• Duplex printing cannot be done with thick paper, OHP transparencies,
• Duplex printing cannot be done using a tray for which [Duplex] is not
Causes and Solutions
Note
lect [Toner Saving 1] or [Toner Saving 2] in [Print Mode] in the [Advanced] di-
alog box.
Select [Thick] in the [Type:] list on the [Paper] tab.
Select [Thick] in the [Paper type:] list on the [Print Settings] tab.
When using duplex printing, make settings to use paper from a tray
other than the bypass tray.
or labels specified as the paper type. Specify another paper type.
selected as the paper type in [Tray Paper Settings] in [System Settings]. Se-
lect [Duplex] as the paper type in [Tray Paper Settings]. See General Settings
Guide.
Other Printing Problems
2
19