Ricoh Type 2018 Printer Reference page 22

Printer/scanner unit

Hide thumbs Also See for Type 2018:

Table of Contents

Troubleshooting

Possible Cause

When using wireless LAN,

is the LED on the wireless

LAN card lit or blinking?

Is the wireless LAN being

used in ad hoc mode?

Did you change the option

settings on the machine?

Confirm the orange LED is lit, and the green LED is lit or blinks

during transmission.

Turn the main power off and back on. See "Turning On the Pow-

er", Copy Reference.

Otherwise, configure [IEEE 802.11b] in [Interface Settings] in [System

Settings]. See "Setting Up the Machine on a Network", Network

Guide.

When using the RPCS™ printer driver on Windows 2000 and con-

necting with IEEE 1394, an error may occur if you change the op-

tion settings on the machine. In this case, follow the procedure

below:

Unplug the IEEE 1394 interface cables connected to the compu-

ter.

Run the utility tool for the IEEE 1394 interface board, which is

stored in the following path on the CD-ROM "Printer Drivers

and Utilities".

\UTILITY\1394\

Reference

For more information about using the utility tool for IEEE

1394, see the README file in the same directory on the CD-

ROM.

Restart the computer.

Connect the computer to the machine using the IEEE 1394 in-

terface cables.

Solutions

Table of Contents