Ricoh Type 2018 Printer Reference page 20

Troubleshooting
Messages/Second messages
Print overrun.
Problem:IEEE1394 board
2
Problem:IEEE802.11b card
Problem:IEEE802.11b board
Paper Tray is in use.
Reset paper tray correctly.
DToner is almost empty
Add toner
Tray # Error
Unauthorized user access.
USB Error
14
Causes
The image data has been
thinned out due to image com-
pression.
An error may have occurred in
the IEEE 1394 board.
An error may have occurred in
the IEEE 802.11b card.
An error may have occurred in
the IEEE 802.11b board.
The specified paper tray is in
use by another function, such
as the copier function.
The selected paper tray does
not exist or is not set correctly.
The toner has almost run out.
An error has occurred with the
paper tray.
# indicates the tray number.
Print job canceled due to user
restrictions.
An error has occurred in the
USB interface.
Solutions
Increase memory capacity.
When installing a memory
module in the machine, con-
tact your sales or service rep-
resentative.
Turn off the main power
switch, and back on again. If
the message appears again,
contact your sales or service
representative.
Wait until the other function
has finished using the speci-
fied paper tray.
Set the paper tray correctly.
Replace the toner cartridge
soon to prevent poor print
quality.
Press [JobReset] to change the
paper tray settings, or press
[FormFeed] to select another
paper tray and print using
that.
Check the User Code permis-
sion status.
Turn off the main power
switch, and back on again. If
the message appears again,
contact your sales or service
representative.