Connecting To The Ethernet Interface - Ricoh Aficio 3228C Printer Reference

E E E E
Turn on the computer.
Note
❒ When using Windows 95/98/
Me/2000/XP and Windows
Server 2003, a printer driver in-
stallation screen might appear
when the computer is turned
on. If this happens, click [Cancel]
on the screen. For more infor-
mation, see p.19 "Preparing the
Machine".
The machine and computer are
now connected. The printer driver
must be installed next. For infor-
mation about how to install the
printer driver, see p.19 "Preparing
the Machine".
Connecting to the Ethernet
Interface
The network interface board supports
10 BASE-T or 100 BASE-TX connec-
tions.
Important
❒ Before making the connection, touch
the metallic part to ground yourself.
A A A A
A core for the Ethernet cable is
supplied with this machine. The
Ethernet cable loop should be
about 15 cm (6 in.) (A A A A ) from the
machine end of the cable.
B B B B
Turn off the main power switch.
Important
❒ Make sure the main power is
off. See "Turning On the Pow-
er", General Settings Guide.
C C C C
Connect the Ethernet cable to the
10 BASE-T / 100 BASE-TX port.
D D D D
Turn on the main power switch.
1.
Indicator (green)
Remains green when the machine is
properly connected to the network.
2.
Indicator (yellow)
Turns yellow when 100 BASE-TX is
operating. Turns off when 10 BASE-T
is operating.
AEV047S
Connecting the Machine
AEU040S
ZKRH050E
1
13