Table of Contents
Advertisement
Output tray settings
Limitation
❒ You cannot interrupt the current stapling job even when a stapling job is spec-
ified with a different function.
❒ When the Booklet Finisher, Finisher 3000M (50-Sheet Staples) or Finisher
3000B (100-Sheet Staples) is installed and stapling or shift-sorting is specified,
the job will be delivered to the finisher shift tray regardless of the output tray
specified.
Tray Paper Settings
❖ ❖ ❖ ❖ Paper Tray Priority:Copier (Copier/Document Server)
You can specify the paper tray for delivery.
Note
❒ Default setting: Tray 1
❖ ❖ ❖ ❖ Paper Tray Priority:Printer (Printer)
You can specify the paper tray for delivery.
Note
❒ Default setting: Tray 1, LCT
❒ The default tray switches to "LCT" if the optional large capacity tray (LCT)
is installed.
❖ ❖ ❖ ❖ Tray Paper Size: (Tray 2,3)
Select the size of the copy paper loaded in the paper tray.
• The paper sizes you can load for trays, when the paper size selector knob
is set to the p mark, are as follows:
• A3L, B4L, A4K, A4L, B5K, B5L, A5K, A5L, 210 × 340 mmL, 210
× 182 mmK, 210 × 170 mmK
• 11"×17"L, 8
8"×13"L, 7
11"×14"L, 10"×15"L, 8
mm(5.5"-11.7") wide × 139.7-431.8 mm(5.5"-17") long)
• 8K(267 × 390 mm)L, 16K(195 × 267 mm)KL
Important
❒ If the specified paper size differs from the size of paper actually set in the
paper tray, a paper misfeed might occur because the paper size is not de-
tected correctly.
1
1
/
"×14"L, 8
/
"×13"L, 8
2
2
1
1
1
/
"×10
/
"L, 5
/
4
2
2
1
/
"×14"L, 8"×10
4
Settings You Can Change with User Tools
1
1
/
"×11"K, 8
/
2
1
1
1
"×8
/
"K, 5
/
"×8
2
2
1
/
"L, custom size (139.7-297
2
1
"×11"L, 8
/
"×13"L,
2
4
/
"L, 11"×15"L,
2
5
79
Advertisement
Table of Contents
