Settings You Can Change with User Tools
Reference
To access User Tools, see p.74 "Changing Settings".
General Features
❖ ❖ ❖ ❖ Panel Tone
The beeper (key tone) sounds when a key is pressed.
Note
❒ Default setting: ON
❖ ❖ ❖ ❖ Warm Up Notice (Copier/Document Server)
Specify whether or not the beeper sounds when the machine becomes ready
for copying after Low Power mode is deactivated, or the power is turned on.
Note
❒ Default setting: ON
❒ If the "Panel Tone" setting is "OFF", the beeper does not sound, whatever
the "Warm Up Notice" setting.
❖ ❖ ❖ ❖ Copy Count Display (Copier/Document Server)
The copy counter can be set to show the number of copies made (count up) or
the number of copies remaining (count down).
Note
❒ Default setting: Up (count up)
❖ ❖ ❖ ❖ Function Priority
You can specify the mode to be displayed immediately after the operation
switch or System Reset mode is turned on.
Note
❒ Default setting: Copier
❖ ❖ ❖ ❖ Print Priority
Print priority is given to the mode selected.
Reference
⇒ p.51 "Multi-Access"
Settings You Can Change with User Tools
5
75