B Loading Paper; Loading Paper In Tray 1 (Tandem Tray) - Infotec Aficio 2060 Operating Instructions Manual

Troubleshooting

B Loading Paper

B
B B
Note
❒ You can change the paper size in
tray 2 and 3.⇒ p.132 "Changing
the Paper Size"
Reference
For details about paper types and
sizes, see p.177 "Copy Paper".
Loading Paper in Tray 1
(Tandem Tray)
Important
❒ When paper on the right side in
tray 1 runs out, paper on the left
will automatically move to the
6
right. While the paper is moving,
the machine instructs you to wait.
At this time, do not pull out the
tray.
Note
❒ You can load paper even while
making copies using paper in tray
1. During copying, you can pull
out the left half of the tray.
A A A A
Pull out the paper tray until it
stops.
116
B B B B
Square the paper, and then load it
in the tray.
When the whole tray is pulled out
A Load the paper.
Important
❒ Align the right edge of the
right copy paper stack to the
right edge of the tray, or the
left edge of the left copy pa-
per stack to the left edge of
the tray.
When the left half of the tray is
pulled out
A Load the paper in the left tray.