Basics
6.
Operation switch
Press this switch to turn the power on
(the On indicator lights up). To turn the
power off, press this switch again (the On
indicator goes off). ⇒ p.32 "Turning On
the Power"
2
1.
Ventilation holes
Prevent overheating. Do not obstruct the
ventilation holes by placing an object
near it or leaning things against it. If the
machine overheats, a fault might occur.
2.
Bypass tray
Use when copying onto OHP transparen-
cies, label paper (adhesive labels), trans-
l u c e n t p a p e r , p o s t c a r d s a n d n o n -
standard size paper.
3.
Interface for network connections
⇒ p.27 "Connecting the Machine (Net-
work Connections)"
22
7.
Control panel
⇒ p.24 "Control Panel"
8.
Front cover
Open to access the inside of the machine.
9.
Paper tray (tray 1-3)
Load paper here.