Table of Contents
Advertisement
Combined Function Operations
Saving Energy
- Low Power Mode
-
-
-
If you do not operate the machine for a certain period after an operation or when
you press the { { { { Energy Saver} } } } key, the display disappears and the machine enters
Low Power mode. When you press the { { { { Energy Saver} } } } key again, the machine re-
turns to the "Ready" status. In Low Power mode, the machine uses less electric-
ity.
3
Note
❒ You can change the setting of the Panel Off timer. ⇒ p.83 "Panel Off Timer"
- System Reset
-
-
-
The machine returns to its initial condition automatically when your job is fin-
ished, after a certain period of time. This function is called "System Reset".
Note
❒ You can change the System Reset time. ⇒ p.83 "System Auto Reset Timer"
- Auto Off
-
-
-
The machine turns itself off automatically after your job is finished, after a cer-
tain period of time. This function is called "Auto Off".
Note
❒ You can change the Auto Off time. ⇒ p.82 "Auto Off Timer"
❒ Auto Off Timer function will not operate in the following cases:
• When a warning message is displayed
• When the service call message is displayed
• When paper is jammed
• When the cover is open
• When "Adding Toner" message is displayed
• When toner is being added
• When the User Tools/Counter screen is displayed
• When fixed warm-up is in progress
• When printer or other functions are operating
48
Advertisement
Table of Contents
