Setting The Take Name Reset Condition And Format - Zoom F8n Operation Manual

Setting the take name reset condition and format

You can set the take name reset condition and format used when recording.
1.
Press .
2.
Use to select
DATA (for Next Take)
.
and press
▶ Continue to one of the following procedures.
Setting the take name reset condition. . . . . . . . . . . . . . . . P .46
Setting the take name format. . . . . . . . . . . . . . . . . . . . . . . P .47
46
META
,
Setting the take name reset condition
3.
Take Reset
Use to select
Mode
, and press
4.
Use to select the reset
mode, and press
Setting value
The take number will not be reset.
However, if the folder is changed and that folder con-
Off tains a number higher than the current take number,
the take number will be set to one higher than the
highest existing take number.
If the destination folder is changed, the take number
Folder Change will be set to one higher than the highest take number
in that folder.
.
.
Explanation