Zoom F8n Operation Manual page 148

Using SD card recording and audio interface functions at the same time (Audio Out from USB)
NOTE
• The
cannot operate on USB bus power. Use the internal
batteries, the dedicated AC adapter or an external DC power
supply to power it.
• Audio Out from USB cannot be used with the following settings
and functions.
- Sampling rate settings other than 44.1/48 kHz
- SD Card Reader (→ P .144)
- Audio Interface (→ P .145)
- (→ P .152)
• A driver is necessary for use with Windows. Download the driver
from the ZOOM website (www.zoom.co.jp/).
• When Audio Out From USB is set to On, the sampling rate cannot
be changed.
• When Audio Out From USB is set to On, files with sampling rates
that differ from the
• Set the input source to USB1–4 (→ P . 80) or set USB1–4 to the
output routing (→ P109, 122, 123) to monitor sound played back
from the computer. (→ P . 80)
• When Audio Out from USB is set to On, the
increase 2 ms. When monitoring sounds being recorded with
a mic in real-time, increased latency can cause interference
between sound transmitted through the air from the source
and the delayed monitored sound, possibly making accurate
monitoring of the sounds difficult.
148
setting cannot be played.
latency will
Disconnecting
1.
Press .
2.
Off
Use to select
press .
3.
Disconnect the cable from the computer and the
.
(continued)
, and