Zoom F8n Operation Manual page 77

HINT
The panning and fader level can be changed as follows.
Move cursor, change setting value: Turn
Select parameter to change: Press
Adjusting trim, fader and pan settings with track
knobs
The track knobs can be used to quickly adjust the fader and
pan settings of each track.
4.
Mixer
Use to select
and press .
5.
Open the mixer on the Home
Screen.
,
6.
Use to select the
parameter you want to adjust,
and press .
7.
Use of the track you want to adjust to change
its setting value.
HINT
The position of the knob on the display always shows the current setting.
NOTE
After changing the parameter be adjusted, for example, if the posi-
tions of and the knob on the display are different, the knob on
the display will appear gray, and moving
setting. In this case, if you adjust
knob on the display, the display knob and
you will be able to use to adjust its setting value again.
F8n
Multi Track Field Recorder
will not affect that
to match the position of the
will be relinked, and
Parameters with setting values and
positions that are different
77