Zoom F8n Operation Manual page 28

Selecting inputs and adjusting levels
Adjusting input levels
1.
Use to select a trim, and
press .
2.
Use to adjust the input
level, and press
NOTE
When a mic capsule is connected, the input levels of Input 1/2 can-
not be adjusted with the
sule to adjust its input volume.
28
.
. Use the level control on the mic cap-
(continued)
HINT
• This can be set in a range from +10 to +75 dB when the input
source is set to "Mic", from –10 to +55 dB when set to "Line", and
from –35 to +30 dB when set to USB.
• If the sound distorts even when you lower the input level, try
changing mic positions and adjusting the output levels of con-
nected devices.
• Using the limiter (→ P .83)
• Using the high pass filter (→ P .82)