Setting / Recording: File Name <File Name - Zoom H4next Operation Manual

1-04 Setting / Recording: File name <FILE NAME>
When recording, a file name is automatically assigned. To change that, take the following steps.
Press the [MENU] button for
more than 2 seconds, and start
operation from the top screen.
1
Press.
2
Select <REC> and press.
3
Select <FILE NAME> and press.
4
Select and press.
<DEFAULT>
<DATE>
No change
STEREO FILE
MONO FILE
NOTE:
• You can set the DATE type only on STEREO
mode.
• You can use other file names on STEREO and
MTR mode. Those setting is operated on <FILE
RENAME>
The initial notation
• When you name the file other than the H4n and
is <DEFAULT>
include except half-size alphabets and figures,
you cannot operate on the H4n.
File Name
STEREO mode:
STE-×××.wav (mp3) : 'STE-'3 figures, extension
* <MONO MIX> setting
MONO-×××.wav(mp3) : 'MONO' 3 figures, extension
090531-×××.wav(mp3) : year, date yymmdd-3 figures, extension
4CH mode:
4CH-×××M.wav
Record file of the built-in microphones: '4CH-' 3 figures 'M' extension
4CH-×××I.wav
Record file of the external input: '4CH-' 3 figures 'I' extension
MTR mode:
TRK1-××.wav : 'TRK' track number- 2 figures, extension
* On stereo tracks put the track number like [1] [2] using L and R.
☞
Ref.
<FILE RENAME>
P.109
052