Setting The Sampling Rate (Sample Rate) - Zoom F8n Operation Manual

Setting the sampling rate (Sample Rate)

You can set the sampling rate used to record files.
1.
Press .
2.
Use to select
and press .
3.
Use to select
Rate
, and press
4.
Use to select the
sampling rate, and
press .
30
REC
,
Sample
.
Setting value
44.1kHz, 48kHz,
These are standard sampling rates.
88.2kHz, 96kHz, 192kHz
Select this when recording video at 23.976 frames
47.952kHz per second if you want to edit at 24 frames per
second later.
Select this when recording video at 24 frames per
48.048kHz second if you want to edit at NTSC 29.97 or 23.98
HD later.
These function the same as the two above, but the
<FILE_SAMPLE_RATE> sampling rate metadata
will be recorded as 48kHz.
47.952kHz (F),
This enables playback and editing with devices
48.048kHz (F)
and software that do not support 47.952kHz and
48.048kHz WAV files. Playback, however, will occur
at the ±0.1% speed at which the file was recorded.
NOTE
• When the recording file format is MP3, only 44.1kHz and 48kHz
can be selected.
• When 192 kHz is selected, L/R tracks will not be recorded. The
Input Delay and Output Delay are also disabled. Moreover,
Auto Mix, Ambisonic Mode, and Input Limiter > On/Off > On
(Advanced) cannot be set.
• Audio Out From USB cannot be used when values other than
44.1 kHz or 48 kHz are selected.
Explanation