Zoom F8n Operation Manual page 142

Recording a slate tone (Slate Tone)
HINT
Press to switch between Postfader and Off.
6.
Press .
142
(continued)
Recording
4.
Press
5.
Push right toward the tone symbol and
release.
NOTE
• When the slate tone is in use, other signals input to the tracks that
it is routed to are muted.
• The slate tone signal is always routed to the headphone L/R chan-
nels regardless of other routing settings.
• The MAIN OUT 1/2 and SUB OUT 1/2 faders do not affect the
levels of the slate mic and slate tone.
HINT
If you push and hold
or more seconds, the slate tone will be enabled until you push the
switch toward the tone symbol again.
to start recording.
right toward the tone symbol for one