Zoom F8n Operation Manual page 146

Using as an audio interface (Audio Interface)
NOTE
• A Lightning to USB Camera Adapter is necessary to connect an
iOS device.
• The
cannot operate on USB bus power. Use the internal bat-
teries, the dedicated AC adapter or an external DC power supply
to power it.
• When the
is used as an audio interface and the sampling
rate is set to 44.1/48 kHz, latency increases 2 ms. When latency
increases while monitoring sounds being recorded with a mic
in real-time, interference occurs between sound transmitted
through the air from the source and the delayed monitored sound,
possibly making accurate monitoring of the sounds difficult.
146
(continued)
Disconnecting
1.
Press .
2.
Exit
Use to select
and press .
3.
Yes
Use to select
and press .
4.
Disconnect the cable from the computer or iOS device
and the .
,
,