Selecting Signals Sent To The Sub Outputs (Sub Out Routing) - Zoom F8n Operation Manual

Selecting signals sent to the sub outputs (SUB OUT Routing)

You send either prefader or postfader signals for each track to the sub outputs.
1.
Press .
2.
OUTPUT
Use to select
and press .
3.
SUB OUT
Use to select
Routing
, and press
4.
Use to select the track for SUB OUT 1 or SUB
OUT 2 routing and press
,
.
.
Converting input
track stereo signals
to mid-side stereo
signals for output
Select prefader
Select postfader
Off
HINT
Press to cycle through the options:
Prefader → Postfader → Off.
NOTE
• When Audio Out From USB is set to On, USB tracks 1–4 can be
assigned.
• Tracks 1–8 can be set to Prefader or Postfader.
• The L/R tracks can only be set to Postfader.
• Tracks 1–8, L/R, and USB1–4 cannot be set at the same time.
Selecting one type will deselect the other.
• When mid-side stereo monitoring is enabled, the pre-fader tracks
will be routed automatically to the sub outputs, with odd to the
left and even to the right. In this case, the routing cannot be
changed manually.
5.
Press .
F8n
Multi Track Field Recorder
Tracks routed to
SUB OUT 1
Tracks routed to
SUB OUT 2
Clear all settings
Set tracks 1–8 to prefader
Switch options:
• Change tracks 1–8 to
postfader
• Change L/R tracks to
postfader
• Change U1–U4 tracks
to postfader
123