NETGEAR UTM5 Reference Manual page 476

ProSecure Unified Threat Management (UTM) Appliance
Figure 285.
2. Select the LAN Groups submenu tab. The LAN Groups screen displays. (The following
figure shows some examples in the Known PCs and Devices table.)
Figure 286.
The Known PCs and Devices table contains a list of all known PCs and network devices
that are assigned dynamic IP addresses by the UTM, or have been discovered by other
means. Collectively, these entries make up the network database.
For each attached PC or device, the Known PCs and Devices table displays the following
fields:
• Check box. Allows you to select the PC or device in the table.
• Name. The name of the PC or device. For computers that do not support the NetBIOS
protocol, the name is displayed as Unknown (you can edit the entry manually to add a
Monitoring System Access and Performance
476