NETGEAR UTM5 Reference Manual page 303

ProSecure Unified Threat Management (UTM) Appliance
Figure 180.
3. Change the name of the authentication phase (the default is Gateway):
a. Right-click the authentication phase name.
b. Select Rename.
c. Type GW_ModeConfig.
d. Click anywhere in the tree list pane.
Note: This is the name for the authentication phase that is used only for the
VPN client, not during IKE negotiation. You can view and change this name in
the tree list pane. This name needs to be a unique name.
The Authentication pane displays in the
Authentication tab selected by default.
Figure 181.
Virtual Private Networking Using IPSec Connections
Configuration Panel screen, with the
303