Change Passwords And Other User Settings - NETGEAR UTM5 Reference Manual

5. Click Apply to save your settings.
6. In the Add Defined Browser section of the screen, add a browser to the Defined Browsers
table by selecting one of the following browsers from the drop-down list:
• Internet Explorer.
• Opera.
• Netscape Navigator.
• Firefox. Mozilla Firefox.
• Mozilla. Other Mozilla browsers.
7. Click the Add table button. The browser is added to the Defined Browsers table.
8. Repeat Step 6
Browsers table.

To delete one or more browsers:
1. In the Defined Browsers table, select the check box to the left of each browser that you
want to delete, or click the Select All table button to select all browsers.
2. Click the Delete table button.

Change Passwords and Other User Settings

For any user, you can change the password, user type, and idle time-out settings. Only
administrators have read/write access. All other users have read-only access.
Note: The default administrator and default guest passwords for the web
management interface are both password. NETGEAR recommends
that you change the password for the administrator account to a
more secure password, and that you configure a separate secure
password for the guest account.
Note: The ideal password should contain no dictionary words from any
language, and should be a mixture of letters (both uppercase and
lowercase), numbers, and symbols. Your password can be up to
30 characters.
Note: After a factory defaults reset, the password and time-out value are
changed back to password and 5 minutes, respectively.
ProSecure Unified Threat Management (UTM) Appliance
and Step 7 for any other browsers that you want to add to the Defined
Managing Users, Authentication, and VPN Certificates
385