Lopi Radiant Plus GSB2 Small Installation Manual page 15

Installation (for qualified installers only)
4. Move the restrictor to between the #4 and #5 position (see below).
Loosen the 2 screws on the exhaust restrictor. Slide
the restrictor to the correct restrictor position then
tighten the screws to secure the restrictor.
5. Locate the (2) rear screws in the ceiling of the firebox. Loosen the screws.
6. Install the extended baffle. Slide the (4) slotted tabs on the extended baffle over the screws
loosened in the steps 1 and 4.
7. Tighten the screws to secure the baffle.
Loosen
Screws
© Travis Industries
Position # 1
Position # 2 (stock)
Position # 3...
Set the restrictor in between position # 4 and #5
Baffle
5/2/18-1476
15
Radiant Small GSB2