Left Log Placement
The left log has one hole and one elevated pad on the bottom. Place the log so the pin on the burner
inserts into the hole on the left end of the log. The right side of the log slides back until it touches the
stop on the burner (see photos below).
Insert pin into hole
in left side of log
Right Log Placement
The right log has two holes on the bottom. Place the log so the two pins on the burner insert into the
holes on the log (see photos below).
© Travis Industries
Finalizing the Installation
5/2/18-1476
Slide right side of
log back until it
touches this stop
Radiant Small GSB2
27