6. Install the heat sink as shown. Then tighten the screws to secure the heat sink.
Figure 96. Installing the heat sink onto the PCIe adapter
7. Install the cover as shown. Then, slide the cover latches to the locked position.
Figure 97. Closing the cover
8. Install the M.2 solid-state drive PCIe adapter in a PCIe x16 card slot. See "Full-length PCIe card" on
page 163.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 210.
Power supply assembly
Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Read this first: Important safety information" on page 1.
150
P920 Hardware Maintenance Manual