Lenovo ThinkStation P920 Hardware Maintenance Manual page 157

c. Pull the handle of the retention latch outward to the open position.
Figure 94. Opening the retention latch
d. Hold the new M.2 solid-state drive by its edges and ensure that the circuit board side is facing
upward. Insert the drive into the M.2 solid-state drive slot on the PCIe adapter until it is firmly seated.
Then, insert the plug of the retention latch into the hole to secure the new drive.
Note: Do not touch the circuit board of the M.2 solid-state drive.
Figure 95. Installing the M.2 solid-state drive
.
Chapter 9 Hardware removal and installation
149